The Optoma HD146X projector is a superior exhibition home theater projector that conveys dazzling 1080p goal and 3,600 lumens of splendor. It includes a 1.1x long-range focal point, vertical focal point shift, and a 10W speaker.
The projector is intended to furnish a vivid artistic involvement in its high differentiation proportion of 25,000:1 and its help for HDR10. It likewise has an assortment of association choices, including two HDMI ports, one VGA port, one USB port, and one sound-out port. The Optoma HD146X is an incredible decision for anybody searching for an elite presentation home theater projector.
Display Problem:
when your Optoma HD146X Projector shows displaying issues:
- Check the associations between the projector and the source gadget.
- Ensure all links are safely associated and that the source gadget is turned on.
- Check the projector’s settings.
- Ensure the right info source is chosen and that the goal is set accurately for your source gadget.
- Actually, take a look at the projector’s light.
- In the event that the light is in excess of a couple of years old, it might be supplanted.
- Check the projector’s air channel. Assuming that the channel is stopped, it can cause show issues, Clean or supplant the channel on a case-by-case basis.
- Reset the projector to its processing plant settings.
- This can assist with settling any product gives that might be causing the showcase issues.
- Assuming none of these means settle the issue, contact Optoma client support for additional help.
Picture issues
When your Optoma HD146X Projector has No picture showing up on-screen:
- Guarantee every one of the links and power associations is accurately and safely associated as depicted in the “Establishment” segment
- Guarantee the pins of connectors are not slanted or broken.
- Check to assume the projection light has been safely introduced. If it’s not too much trouble, allude to the “Supplanting the Light” area.
- Guarantee that the “Quiet” highlight isn’t turned on
The picture is out of concentration:
- Change the Emphasis Ring on the projector focal point.
- Ensure the projection screen is between the necessary separation from the projector
The picture is excessively little or excessively huge:
- Change the Zoom Switch on the highest point of the projector.
- Draw the projector nearer to or further from the screen.
- Press “Menu” on the projector board, and go to “Show – >Aspect Proportion”. Attempt the various settings
The picture is extended:
- At the point when you play an anamorphic DVD or 16:9 DVD, the projector will show the best picture in 16: 9 configuration on the projector side.
- In the event that you play the LBX design DVD title, kindly change the organization to LBX in the projector OSD.
- In the event that you play the 4:3 configuration DVD title, if it’s not too much trouble, change the organization to 4:3 in projector OSD.
- Satisfy the arrangement of the showcase design as 16:9 (wide) angle proportion type on your blue ray player
The picture has skewed sides:
- If conceivable, reposition the projector so it is fixated on the screen and underneath the lower part of the screen.
- Use “Show – >Keystone” from the OSD to make a change
Hazy twofold picture:
Press the “3D” button and change to “Auto” to stay away from the typical 2D picture is a foggy twofold picture.
The picture is turned around:
Select “Arrangement – >Projection” from the OSD and change the projection bearing
Two pictures:
Press the “3D” button and change to “SBS” for the input signal is HDMI 1.3 2D 1080i next to each other.
No Picture Because of Broken or Harmed Lens:
- As examined in the prior step, in the event that the projector is turned on, however, you see no picture being shown on the screen, the principal thing to check and investigate is whether the links are very much associated.
- In any case, assuming there are no worries with that, the issue can be in the light or light stabilizer unit. The lightweight unit controls the light.
- Consequently, on the off chance that the unit isn’t working, in most likelihood, the light will likewise not work. The best way to approach this issue is to supplant the light. There are various types of lights accessible in different value reaches, and you can get a light fitting your financial plan and detail.
The picture doesn’t show in 3D:
- Check to assume that the battery of 3D glasses is depleted.
- Check to assume that the 3D glasses are turned on.
- At the point when the information signal is HDMI 1.3 2D (1080i one next to the other half), press the “3D” button and change to “SBS”
Controller Issues
Assuming that the controller of your Optoma HD146X Projector doesn’t work attempt these:
- Check the working point of the controller is pointed inside ±15° of the IR collector on the projector.
- Ensure there are no obstacles between the controller and the projector. Move to inside 6 m (20 ft) of the projector.
- Ensure batteries are embedded accurately.
- Supplant batteries assuming they are depleted
Temperature High Issue:
when you Optoma HD146X Projector Temperature high while you using check these things:
- Ensure the air channel is perfect and liberated from residue and trash. On the off chance that it is grimy, clean it with a vacuum cleaner or compacted air.
- Ensure the projector is in a very ventilated region and not in direct daylight.
- Ensure the fan is running appropriately and not hindered by any items.
- Ensure the light isn’t excessively old and is working appropriately.
- Ensure the power supply isn’t over-burden and is giving the sufficient capacity to the projector.
- Ensure the temperature settings are set accurately and not excessively high.
Different Issues
Assuming that your Optoma HD146X Projector deals with these issues attempt these tips:
- The projector quits answering all controls
- In the event that is conceivable, switch off the projector, turn off the power line, and stand by no less than 20 seconds prior to reconnecting power.
- The light wears out or makes a popping sound
- At the point when the light arrives at its finish of life, it will wear out and may make a noisy popping sound. Assuming this occurs, the projector won’t turn on until the light module has been supplanted