In the event that you’ve bought an Epson projector for your new home theater, odds are you’re not simply laying it on a table or rack. So how would you mount an Epson projector to a roof?
Fortunately, Epson sells an all-inclusive projector roof mount that is smaller and tough. Thus, assuming that you’re considering how to mount an Epson projector to your roof, it’s straightforward. Yet, relax, we’ll tell you the best way to make it happen.
The Epson mount is known as the Epson V12808001 inclusive Projector Roof Mount, and today we will show you how you can mount it.
Epson General Projector Mount Outline
Anyway, what is the Epson General Projector Mount? We’re going to spread it out for you.
The Epson All inclusive Mount is little. It’s generally 6.5 inches and weighs under two pounds. This roof mount is viable with a significant number of Epson projectors.
Albeit the specific aspect is 4.41 crawls by 4.41 creeps by 4.02 inches, it is one of a handful of the hardier mounts around.
This general Epson mount is viable with Epson PowerLite Home Film 1040, 1440, 2000, 2030, 2040, 3000, 3500, 3600e, and 4770W. By the by, its adaptability makes it viable with most Epson projectors.
The mount is white. It’s smooth, stylish, and offers a low noticeable profile.
When put on the roof, the mount contains a fast interface and separate delivery. It is additionally made with simple admittance to significant projector parts like the light and channel access.
You can likewise mount it flush to the roof, giving it a sleeker and practically undetectable look.
The Widespread Epson Roof Mount is exceptionally flexible, which gives it its adaptability. In any case, the material is decidedly made to forestall any shaking.
In the event that you’re keen on a video outline of the Epson Mount, look at this video. It will show you every one of the essential parts, what comes in the case, and the fundamental standards of how to mount it.
How to Mount an Epson projector to a Roof?
Mounting the Epson mount to the roof isn’t quite as troublesome as you suspect. We will walk you through it.
Despite the fact that mounting it is simple, there’s another establishment part that we won’t cover, and that is connecting the projector to its proper wires and mixing them into your home theater.
How about we keep on seeing what we really want?
Tools You’ll Need
How about we go over the vital devices, most importantly, you’ll have to mount this thing to the roof.
You’ll require two explicit L-formed Allen Keys. Yet, just relax, these are remembered for the bundle.
Notwithstanding, you’ll likewise require a power drill, a Phillips Screw Driver, and a half-inch turn head wrench.
Equipment in the Container
The All inclusive Epson Roof Mount accompanies many screws and parts. Yet, don’t be overpowered. We’ll turn out every one of them here, for good measure.
It accompanies one three-inch pipe that covers the mount’s “neck.” This thing covers any wires that attach to the projector.
You’ll likewise find one roof plate and one all-inclusive connection point with a roof mount.
To assemble all of this, the equipment gave incorporates:
- Four M3X8mm screws
- Four M3 level rings
- Four M4x10mm screws
- Four M5x10mm screws
- Four M6X10mm screws
- One 5/16 of an inch by 1/fourth of an inch plug
- Two 10-24×3/18 an inch level head screw
- One 5/16″ X 1/2″ attachment
- Four 5/16″ X 2-3/4″ slack screws
Significant Data Prior to Proceeding
One thing we ought to make reference to is that anything connected to a roof ought to be joined to a shaft. That is on the grounds that a shaft can uphold the heaviness of this thing and the heaviness of your projector.
Taking into account that a few projectors weigh around 40 pounds, the roof mount should be introduced in a satisfactory primary manner that can uphold up to multiple times the weight.
Introducing the roof mount with the projector erroneously can bring about serious injury or extreme harm to your hardware.
On the off chance that this is beyond what you can deal with, if it’s not too much trouble, consider recruiting a handyperson to take care of you.
One more basic highlight consider prior to mounting the roof mount is that you ought to definitely know the distance you need the projector mounted. This gives you an unmistakable picture of the fitting size.
For the specific toss aspect, kindly read your Epson manual.
In the event that you anticipate introducing your roof mount to a substantial roof, the cycle will contrast somewhat. In any case, you can continuously find the guidelines on the best way to do as such inside the roof mounts manual.
Introducing the Mount
How about we accept at least for now that you’re introducing the roof mount on wood joints? To begin with, you’ll take the roof plate and imprint two openings where you’ll bore the screws in.
Nonetheless, ensure the openings are enough situated inside the focal point of the wood light emissions house.
Presently, drill the 7/32″ x 2-3/4″ pilot openings into the wood joist.
Then, approximately put in two 5/16″ x 2-3/4″ slack screws through level rings and the roof plate, and into the wood.
As of now, don’t fix the roof plate. That is so you can oblige wiring.
In the event that you’ve proactively introduced a flush wiring framework in your home theater and are sufficiently ready for the following part, then keep on running the wiring through the roof plate.
Introduce the Proper Line
Now that the wiring is set up, you can fix any free screws on the roof plate to make a strong and flush plate against the wall.
Then, get the proper line and permit any links to go through.
Change the line into the roof plate cozily. Take the L-formed Allen screw and the fitting attachments to get the line.
The General Point of interaction Introduce
Get the general point of interaction and release the four butterfly nuts on it. Eliminate the projector mount from the general point of interaction.
Take the projector mount with the proper line. String it through any wires and mount it to the line by turning it counterclockwise until it fixes.
Secure the mount to the line with the screws however, don’t overtighten.
Presently you can join the all-inclusive connection point.
As a side note, there is nobody approach to mounting the widespread connection point. It’s made so you can coordinate it with numerous projectors of various sizes.
The widespread point of interaction has legs that you can by and by design contingent upon the projector you have. You can adjust it to the appropriate openings on the projector. Accordingly, you can change the connection point to fit numerous arrangements.
From here, everything is adjusted by your projector.
The legs of the UI are customizable. You can move them around. Abbreviate them or lengthen them. Or on the other hand, you can eliminate them.
For additional guidelines on the Epson Widespread Roof mount, kindly see the client manual for itemized data.
In any case, that is the way you mount an Epson projector to the roof utilizing the General Epson Roof Mount.
Epson EB-E01 XGA | Solutions When “Not Supported” Message Appears